Application of Power Monitoring System in Adama I

時間：2021-05-21作者：安科瑞電子商務（上海）有限公司瀏覽：141

朱鹍
安科瑞電氣股份有限公司  上海嘉定



Abstract: Introduce the project of Adama industrial park, Ethiopia, which uses intelligent power meters to collect various electrical parameters and switch **s at the distribution site. The system adopts the method of on-site networking. After networking, it communicates via fieldbus and transmits it to the background. The Acrel-2000 power monitoring system realizes real-time monitoring and management of power distribution circuit power in the distribution room.
Keywords: intelligent power meter; Acrel-2000; power monitoring system


0 Demand analysis
To ensure the statistics and analysis of electricity load for production management and real-time monitoring of hazard sources. Real-time online monitoring of parameters such as voltage, current, and power in the incoming and outgoing circuits of the power distribution room at the project site is required. Once the monitoring point is monitored with abnormal parameters, it can detect and alarm in time, and relevant personnel can take necessary measures to avoid safety accidents. The automatic meter reading function saves manpower and material resources. The power trend curve function can intuitively display the working status and time of each circuit, which is convenient for users to find abnormal power circuits and make corrections in time, and establish a multi-level electrical energy measurement system to provide energy analysis basis .
Data collection
  Automatically collect analog data of all power meters on site, and automatically collect on-site switching data such as on-site switch status and fault status.
  Support real-time collection, automatic periodic collection (timing collection) configurable cycle (1 minute to 24 hours).
  Support data transmission correctness inspection, automatic processing of abnormal data.
  Support multi-threaded processing mechanism, improve the efficiency of data collection, and can collect data from multiple devices at the same time.
  The real-time data display adopts the intuitive display mode of the main wiring diagram of the distribution box, and the disconnection and fault status of each circuit switch are intuitively visible.
Data analysis and processing
  Comprehensive statistics and analysis of data need to achieve the following functions:
Statistics and calculation of the electricity consumption data of each equipment in hours, days, months, years and other time periods.
  Calculate the large, small and average value of the electrical load (active power, reactive power) of each device.
  Count the power consumption (active power and reactive power) of each substation and the whole.
Data query and display
  It is required to facilitate the realization of client query and query of managers at all levels. The query interface can adapt to the requirements of managers at all levels. It can support flexible condition combination query and comparative analysis.   Various types of statistical analysis data can be flexibly used in reports and other charts. Intuitive display function.
  According to the different permissions of different users, the data display function is divided into three layers: operation layer, management layer, and decision-making layer.
  The operation layer has functions such as energy consumption analysis, cumulative consumption, real-time monitoring, running records and ratios, comparison, and benchmarking analysis.
  The management has functions such as statistics and analysis of energy consumption data, comparison of classification and sub-items, and benchmarking analysis.
  The decision-making layer has functions such as energy data analysis, data deletion, and database import/export.
authority management
  It is required to assign different roles to different users, and be able to authorize function sub-menus, specific file records, data records, etc.
  The system requires a reasonable and complete user security control mechanism to protect the information resources in the application environment and prevent the loss, theft and destruction of information.
Energy-saving renovation and effect evaluation
  It is required to provide data support for the energy-saving transformation of production, and can provide the effect evaluation before and after the energy-saving transformation.
parameter settings
  The transformer ratio of each loop and the setting value of various current and voltage protection can be set through the acquisition cabinet.
  Fault judgment and alarm have automatic fault judgment and use sound and light alarm function. Alarm types include switch failures, voltage and current overruns, communication failures of the field acquisition module, and communication failures with the monitoring system. The alarm time is automatically recorded in the system database, which is convenient for users to inquire. The staff can grasp the real-time operation status of the substation at any time, find the operation failure of the substation and distribution, and make corresponding treatments, improve the management efficiency of the substation and distribution, and enhance the safety of the power system. reliability.

 

2 System solutions
1)  According to the actual situation of Adama industrial park, the overall network structure of Acrel-2000 system adopts shielded twisted pair to directly connect to the data collector and then directly connect to the monitoring host in the power distribution room through the network cable, ensuring the transmission of the power monitoring and monitoring system. The stability and real-time performance.
  The station control management layer is the direct window of human-computer interaction for the management personnel of the power monitoring system. In the Adama Project, it mainly refers to the monitoring host placed in the power distribution room on the first underground floor.
2）Network communication layer
The communication layer is mainly composed of collectors, Ethernet devices and bus networks. The main function of the serial server is to monitor on-site intelligent instruments; the main function of Ethernet equipment and bus network is to realize the data interaction between the substation and the main station, so that the management of the power distribution system is centralized, informatized, and intelligent, and the power distribution is improved. The safety, reliability and stability of the system have achieved the goal of unattended operation.
3）Field device layer
The field equipment layer is the data acquisition terminal, which is mainly composed of smart meters. The smart meters are connected to the communication server through the shielded twisted pair RS485 interface and the MODBUS communication protocol bus connection. The communication server reaches the monitoring host of the power distribution room for networking. Realize remote control.


System structure diagram

 

 

3 System functions
  The real-time monitoring system diagram of the substation is the main monitoring screen, which mainly monitors the operating status of all circuits in the substation in real time. Red represents closing and green represents opening. In the system diagram, you can intuitively see the operating parameters and status of each incoming and outgoing line, and you can see all the conventional power parameters on the outgoing side of the transformer, such as: three-phase voltage, current, active power, reactive power, and power factor , Frequency, active power, etc. As shown in the figure below:

primary system diagram


    
  The remote **ing and remote measurement alarm functions mainly complete the monitoring of the switch operation status of the low-voltage outlet circuits and the load incoming line. The pop-up alarm interface for switch displacement and load limit violations indicates the specific alarm location and sounds the alarm to remind the duty personnel to deal with it in time. The load limit can be set freely under the corresponding authority.
  The event alarm record function mainly completes the record of the alarm information and the occurrence time of the alarm information that occurred during the query time period, and provides the basis for the staff on duty and analyzes the cause of the accident, as shown in the following figure:


       Alarm function real-time query

 

  Parameter meter reading function, mainly to query the electrical parameters of the low-voltage outgoing circuit. Supports electrical parameter query at any time, with functions such as data export and report printing. This report queries the electrical parameters of the low-voltage circuits of the incoming and outgoing lines of the Adama power distribution room, mainly including: three-phase current, active power and active power. The name of each circuit in this report is associated with the database, which is convenient for users to modify the name of the circuit. As shown below:

           Parameter meter reading


  The power consumption report function can select the time period for query, supports the cumulative query of the power consumption at any time period, and has the functions of data export and report printing. Provide accurate and reliable electric energy report for the staff on duty. The name of each circuit in this report is associated with the database, which is convenient for users to modify the name of the circuit. As shown in the figure below, the user can print the report directly, and save it to another location in EXCEL format. As shown below:

Energy report


  A schematic diagram of the system communication structure, which mainly shows the network structure of the system. The system adopts a hierarchical distributed structure and monitors the communication status of the bay layer equipment at the same time. Red indicates that the communication is normal, and green indicates that the communication is faulty. The figure below is a schematic diagram of the communication status of the substation.

Communication structure diagram

 

4  Conclusion
  In the application of today’s power distribution facilities, the safety of the project’s power distribution is very important. The application of the Acrel-2000 power monitoring system in the Adama described in this article can realize the real-time power consumption of the power supply and distribution circuit in the power distribution room. Monitoring, not only can display the power status of the loop, but also has a network communication function, which can form a power monitoring system with a serial server, a computer, etc. The system realizes the analysis and processing of the collected data, real-time display of the operation status of the distribution circuits in the distribution room, pop-up alarm dialogs, voice prompts for load exceeding limit, and generates various electric energy reports, analysis curves, graphics, etc., which is convenient The remote meter reading, analysis and research of electric energy show that the system is safe, reliable and stable, providing a true and reliable basis for the project to solve the electricity problem, and has achieved good benefits.


Bibliography
1.Solutions For Enterprise Micro-grid System 2020.02

作者簡介：
朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向為企業能源管控
：@ 手機： QQ：



安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 城市地下綜合管廊的電氣設計及產品選型方案

  朱鹍安科瑞電氣股份有限公司? 上海嘉定? ?201801摘要:綜合管廊在我國有“共同溝、綜合管溝、共同管道”等多種稱謂，在歐美等國家稱為“UrbanMunicipalTunnel”。城市綜合管廊是在城市道路下面建設，將電力、電信、供水、燃?xì)?、熱力等管線集中在一起，實行“統一規劃、統一建設、統一管理”，以做到地下空間的綜合利用和資源共享。本文以北方某城市為例，闡述綜合管

• 西安航天城?中心廣場二期1#樓項目能耗監測系統的研究與應用

  朱鹍安科瑞電氣股份有限公司，上海 嘉定 201801；?摘要：大型公共建筑總面積不足城鎮建筑總面積的4%，但總能耗卻占全國城鎮總耗電量的22%，大型公共建筑單位面積年耗電量達到70～300KWh，為普通居民住宅的10～20倍。公共建筑是節能大戶和節能，做好公共建筑節能工作，對促進和帶動全社會節能工作，實現節能減排目標，落實“轉方式、調結構”重大戰略具有重要意義。本文介紹西安航天城?中心廣

• 高校水電管理信息化和智能化的實現及能效平臺的應用

  摘 要：在高等教育事業快速發展進步的大背景下，高校水電管理需要逐步實現信息化與智能化，否則將出現能源負荷需求制約教學科研發展的問題，同時也會嚴重滯延高校信息化管理水平的有效提高。對此，高校應當充分對水電管理信息化和智能化發展過程中存在的缺陷與不足進行深入分析，并通過合理的對策來改善這一現狀，從而促進高校后勤管理水平的有效提升。本文簡單介紹高校水電管理信息化和智能化發展過程中存在的缺陷與不足，并就相

• 智能照明系統在智能建筑中應用與產品選型

  摘要：目前來說，科學技術迅猛發展，并很大的改變了人們的生活。隨著智能化技術的出現，照明控制系統加體現出智能化特點，可以充分利用人工和自動化控制進行結合，使照明系統能滿足人們的實際需要。與此同時，現代化照明系統不僅操作簡單，而且加便于管理，有利于好的節省人力、財力資源。本文針對智能照明系統的應用現狀展開分析探討，并提出照明系統的未來發展趨勢。文章主要針對于智能照明系統在智能建筑中的應用進行簡要探討分