安科瑞IoT電能管理系統性解決方案在馬來西亞某工廠的應用

時間：2021-12-16作者：江蘇安科瑞電器制造有限公司瀏覽：109

1. 應用場景Application Scenario

對工廠的三相用電設備的用電量進行采集并上傳至系統， 從而使用戶能夠?qū)崿F(xiàn)在PC上就能通過IoT EMS系統查看設備用電情況。

Customers need to collect the basic energy consumption data and upload it to management system so that they can realized real-time and remote data monitoring using their PC.

2. 技術選型 Technical Selection

2.1三相回路電壓為415Vac L-L，額定電流不過80A AC，三相四線接線，電表方面選型三相帶RS485（MODBUS-RTU）通訊的電表ADL400。  

Rated voltage of 3-phase monitoring circuits is 415Vac L-L while the rated current is below 80A AC, thus selection of metering devices will be ADL400 3-phase energy meter with RS485 communication of MODBUS-RTU protocol

 

2.2工廠經確認后WiFi覆蓋條件較好，頻段為2.4GHz，方便提供220Vac供電，網關選用AWT100-WiFi搭配POW模塊。支持廣播自動抄表以便后續下行設備的添加。該網關上行為4GHz WiFi，采用MODBUS-RTU over TCP的透傳通訊協議。下行為RS485通訊，采用MODBUS-RTU協議，從而與ADL400配合對數據進行上傳至云服務器通向系統。

After discussing with the customer, factory is with stable 4GHz WiFi coverage and **,and a power supply of 220Vac is preferable. So, for the gateway parts, we select AWT100-WiFi which own auto-broadcasting function that can ease the later adjustment with subsequent ADL400. Also, AWT100-WiFi is paired with AWT100-POW power module.Other than that, since AWT100-WiFi is with upstream of 2.4GHz WiFi using MODBUS-RTU over TCP protocol and downstream of RS485 using MODBUS-RTU protocol to be paired with ADL400 for energy consumption data uploaded to cloud server and finally to the IoT System.

 

2.3測試階段服務器使用我司已經租用的亞馬遜云服務器以節省客戶預算。

  For pilot project phase, cloud server is highly recommended to use our company’s cloud server which has been rent on Amazon to save the customers’ budget on testing phase.

 

2.4根據需求系統選用IoT EMS系統，并提供3個月試用以便客戶測試。

According to the request, IoT Energy Management System will be the most appropriate one and can provide 3-month free trial for testing use.

 

3. 初期方案架構Pilot Project Solution Structure

 

 

4. 后期方案方向 Plan after Pilot Project

若初期方案測試成功，后期方案方向?yàn)椋?/span>

If pilot project proved to be successful, later plan should be as below:

4.1云托管方案：綜合考慮云服務器租用成本以及點位數量不多的情況，云方案推薦為系統軟件選用托管，云服務器依舊使用我司的云服務器。硬件設備層*改動，只需后續增訂ADL400三相電能表，若點位數量需求較多，根據情況配套增訂AWT100-WiFi網關。

   Cloud Hosting Service Solution: Considering about the comprehensive cost of renting the cloud server and the amount of monitoring circuits, deployment of cloud IoT Energy Management System should be paired with hosting service. In this situation, customer don’t need to afford the rent of cloud server and will use our own cloud server. Also, for the hardware of this solution, no change need be done just like in the pilot project solution structure. Customer only need to order more ADL400 3-phase energy meter and maybe paired AWT100-WiFi gateway according to the number of subsequent request.

   

4.2本地買斷方案：若客戶對數據保密性比較有想法，后期推薦方向?yàn)镮oT系統買斷服務，服務器架設本地服務器并搭配工業交換機與UPS電源。硬件設備層電表依舊推薦ADL400，特殊型號ADF400L不推薦使用，原因是在三相四線接線為直通式接線而非互感器接入時，ADF400L的測量模塊需求數量較多，無法減少成本。網關方面根據后期點位數量增配AWT100-CE或者APort100.

   Local Buy-out Service Solution: If request from customers for data safety and Confidentiality is much more higher. The buy-out service of IoT Energy Management System to be paired with a Local Server will be the best choice. Yet the solution need to do a lot of change in hardware like. First, deploying of local server need to be paired with industrial switch and UPS. Second, for energy meter, ADL400 is still more recommendable.Since the special module, ADF400L Multi-circuit energy meter with built-in Ethernet communication won’t save much budget on the application of 3-phase wiring via direct connection instead of via CTs. At last, gateway need to be changed from AWT100-WiFi to AWT100-CE or Aport100 according to the amount of subsequent request.

 

5. 后期方案架構 (僅指采用本地方案的情況下) Late-stage Solution Structure （For local solution only）

 

相關產品：多功能電表、導軌式智能電表、無線電表、4G電表、NB電表、電機保護器、馬達保護器、線路保護器、預付費電表、無線測溫、電房**系統、配電室綜合監控系統、電能管理系統、能耗管理系統、用電管理系統、能源信息化系統、預付費管理系統



江蘇安科瑞電器制造有限公司專注于電能管理系統,馬達保護器,配電室綜合監控系統,線路保護器等

• 詞條

  詞條說明

• 蘇州獅山廣場能耗管理系統

  摘要：隨著社會生活水平的提高，經濟的繁榮發展，人們對能源的需求逐漸增長，由此帶來的能源危機日益嚴重。商場如何實時的了解、分析和控制商場的能源消耗已成為需要解決的迫在眉睫的難題。傳統的能源消耗智能以月/季度/年為周期進行，然而商場是每日、每時都在進行，能源消耗也是每日、每時的發生。本文介紹蘇州獅山廣場項目，采用安科瑞智能電力儀表采集配電現場的各種電參量，系統采用現場就地組網的方式，組網后通過Acre

• 整流設備諧波產生原因和治理

  01簡述各種電子設備和電子計算機，都需要由穩定的直流電源供電。通常都是將工業用的交流電經變換來獲得所需的直流電。傳統的把交流電變換成穩定的直流電的方式主要分為變壓、整流、濾波、穩壓等四個過程。02單相整流設備諧波分析常見的單相整流負載主要有，以電視機為代表的家用電器，特別是變頻空調、電磁爐等；節能燈、調光燈等照明設備；大尺寸的LED屏幕（采用很多開關電源并聯供電）1、單項可控整流電路原理圖。2、單

• 安科瑞AAFD-DU多回路故障電弧探測器在某高校項目上的應用

  摘要 故障電弧集中顯示單元對接入線路中的故障電弧傳感器進行統一檢測。故障電弧傳感器可以對故障電?。òü收喜⒙?lián)電弧、故障串聯電?。┻M(jìn)行合理的檢測，當檢測到線路中存在引起火災的故障電弧時，顯示單元可以進行現場的聲光報警，并將報警信息傳輸給電氣火災監控設備。集中顯示單元可同時通過對配電回路的剩余電流、導線溫度等火災危險參數實施監控和管理。 故障電弧集中顯示單元適用于工業與民用建筑中10KW及其以下的

• “綠色安全 應用”-2021年湖南省建筑電氣行業盛會召開

  10月15日，一年一屆的湖南省建筑電氣行業盛會在長沙楓林賓館隆重舉辦。安科瑞電氣與業內工程師、設計師、*相聚長沙，共同推動湖南智慧城市發展，探討綠色建筑電氣技術應用！會議由湖南省土木建筑學會電氣專業、湖南省建筑電氣設計情報網、中國建筑電氣網聯合主辦。湖南省土木建筑學會電氣專業主任委員梁志主持開幕式，會議上多位行業*做交流分享，對當下建筑電氣技術的熱點問題進行深入解析，交流建筑電氣