Wireless Temperature Measuring Product in Power Di

時間：2021-03-24作者：安科瑞電子商務（上海）有限公司瀏覽：59

朱鹍
安科瑞電氣股份有限公司  上海嘉定



1. Necessity of temperature measurement at electrical contacts

The primary system of a power system is generally composed of power supply lines(including overhead lines and cables), transformers, busbars, switchgear and other electrical equipment. There are a large number of electrical connection points between them, and almost all electrical faults will cause the temperature change of the fault point due to the current flowing through it and generating heat. For example, overheating is a sign of large accidents and a major disaster area, such as overhead line connection, cable joint, cable middle connection, cable laying bend, partial discharge of high-voltage cable, dynamic and static contact of high-voltage switch cabinet and other connections, and low-voltage electrical connection.
 
2. Current Status
For many years, due to the limitations of the technical level, although infrared thermometer, infrared imager, temperature sensing cable, traditional point-type temperature measurement system have been used to solve the above problems, but can not achieve the switch cabinet such as circuit breaker, the connection point and contact temperature measurement. At present, domestic electric temperature measurement mainly uses infrared point measuring instrument and optical fiber temperature measuring instrument. However, the on-line method cannot solve the problem of high-voltage insulation, so the electrical equipment with limited space, such as the contact of high-voltage switch, basically operates in a completely unmonitored state, with major safety hazards.
 
3. Project background information
A domestic company specializing in industrial and AI solutions learned from a electrical complete plant in Egypt that they had a building construction project recently. The switchgear in the distribution room needs to be installed with wireless temperature measurement products. The company has found Acrel from the Internet. At present, they first need to make a set of demonstration cabinet to measure the temperature of the electric contact in the cabinet. Since there is no starting current, we will choose the second generation of wireless temperature sensor battery powered ATE200, with receiver ATC450-C, and make a local display on the cabinet.
    
4. Advantages of wireless temperature measurement products
In recent years, wireless temperature measurement products began to appear. The temperature sensor with built-in battery and wireless transmitter module is installed at each temperature measuring point. Due to its small size and no wiring, its electrical safety is guaranteed. The sensor periodically sends the temperature data wirelessly to the receiving unit, which sends the data to the receiving unit.
For the temperature detection of electrical equipment in the distribution room, the scheme of centralized reception and display is adopted, which greatly reduces the engineering installation workload and shortens the installation time, making it convenient to realize the temperature measurement transformation of important substation, and also has the same advantage for the construction of new stations.
Wireless temperature measurement products meet the demand of real-time temperature measurement at switch cabinet contacts in the distribution room, and have obvious advantages in reducing investment, engineering installation, maintenance labor and cost. The implementation of this project can effectively improve the safe and reliable operation level of the power supply system and reduce power failure, which is of great significance to ensure the normal production and reduce the loss caused by accidents.
 
5.Products used in this display cabinet
（1）Battery-powered wireless temperature sensor
  Sensor installed in a heating area that collects temperature and transmits it wirelessly.
 
 
（2）Receiving unit
 
 
 
（3）Displaying unit
 
 
6.Typical Application 
 
 
Bibliography

1、Solutions for enterprise micro-grid system

作者簡介：
朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向?yàn)槠髽I(yè)能源管控
：@ 手機： QQ：



安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 淺談用能單位能耗在線監測系統企業端平臺架構與功能實現

  朱鹍安科瑞電氣股份有限公司?上海嘉定 ?201801摘要：用能單位能耗在線監測系統是對全國年用能量在10000噸標煤以上的企業按裝能耗監測企業端設備，并實現企業用能主要指標數據到數據接收服務器的及時上傳，再由平臺軟件支持進行宏觀能耗分析的一套在線信息化系統。該系統主要服務于兩類用戶，各級節能主管部門和用能單位企業。本文通過分析兩類用戶不同需求，提出建設用能單位能耗在線監測系

• 棉紡織廠電氣*措施及電氣*限流式保護器的應用

  朱鹍安科瑞電氣股份有限公司? 上海嘉定摘要：棉紡織廠屬于火災危險場所，在進行電氣設計時要考慮并采取一定的*措施。本文從接線、熔斷器的選用、中性點接地方式的選擇和接地等問題，介紹了電氣*的一些措施。并就引發火災嚴重的線路短路故障問題，介紹了電氣*限流式保護器的應用。關鍵詞：棉紡織廠；電氣*；限流式保護器? ? ? ?以原棉作為主要生產原料的棉

• 電氣*限流式保護器在木質房屋中的應用

  安科瑞 朱鹍安科瑞電氣股份有限公司?上海嘉定 201801摘要：隨著社會的不斷進步，各行各業的電氣化程度也越來越高，配電系統用電負荷過大、線路短路等原因?qū)е码姎饣馂?zāi)發生越來越頻繁，使得火災數量呈上升趨勢。據公安部消防局5年的統計分析，電氣火災發生的場所中，住宅發生火災事故的數量高居**，線路短路及線路老化是誘發事故的主要原因。傳統線路保護裝置使用電磁脫扣，分?jǐn)鄷r間在毫米級，無法有效抑制短

• 淺談基于CT取電無線測溫系統低功耗的實現與應用

  朱鹍安科瑞電氣股份有限公司 上海嘉定 2018012.1鐵芯材料選擇? ? ? ?目前可供使用的鐵芯材料有硅鋼材料、坡莫合金材料和納米晶材料，經過試驗本產品選用硅鋼材料鐵芯滿足設計要求，價格較*，使得本產品在**業中有競爭力。2.2線圈匝數設計? ? ? ?對感應取電建立簡化模型，進行理論分析。假設感應取電的初級線