ACREL ASJ earth leakage relay’s Application in Philippine mine

時間：2021-10-20作者：安科瑞電子商務（上海）有限公司瀏覽：43

朱鹍

安科瑞電氣股份有限公司，上海 嘉定 201801

Abstract: Ground fault protection for electrical circuits, equipment and electrical fire accidents caused by ground fault currents are increasingly becoming a daily necessity. For the main energy-consuming nodes on the user side, a residual current relay is designed and installed to monitor the residual current status of each energy-using circuit in real time. Through real-time monitoring of energy use and related power parameters, the safety, reliability and maintenance efficiency of energy use are improved, the labor cost of maintenance is reduced, and the unattended monitoring of residual current is realized. Through the real-time monitoring of energy use, data collection and alarm, the residual current in the power distribution system is monitored, and the ground fault protection of the user's electrical circuit is provided to prevent fire accidents and personal electric shock accidents caused by residual current. Here is a brief introduction to the application of our company's ASJ earth leakage relay in the Philippine mine.

 

1.Project Overview

   The mine factory is located in the Philippines, because the current is very big, electricity supply for mine is special , customers hope that through in the power distribution ark installation of residual current relay to residual current monitoring line, and hope that can be displayed on the display panel real-time monitoring of residual current value rather than setting the ratio of residual current value, the ratio can reach 80% when the residual current relay immediately report to the police. Acrel ASJ10-LD1A with residual current transformer, successfully solve the customer's on-site residual current monitoring requirements. Due to the large current on site, we have communicated for many times on the selection of residual current transformer, and selected the most appropriate residual current transformer for the customer based on copper bar and current specifications.

 

2.  ASJ Series Residual Current Relay

    ASJ series current action relays can be combined with low-voltage power supplies or low-voltage contactor to form a combined power supply current protection, mainly used for AC 50Hz, voltage and below TT400V devices and TN system piping, in addition to ground fault protection for electrical circuits to prevent ground faults Common equipment damages and electrical failures caused by this can also prevent the danger of personal electric shock and provide direct contact protection.

    The product meets the requirements of GB/T 22387-2016 "Catalyst Current Relay".

ASJ series sanitary current relays integrate line over-voltage and under-voltage protection functions and automatic additional functions for normal voltage. The product is small in size, high in precision, flexible in structure and easy to install. It is a safety protection device in the field of civil construction.

 

3.  Model description

 

Technical features

 

 

Note 3：ASJ10L-LD1A rated residual action current I N is 10mA-30A continuously adjustable;

Note 4：ASJ10L-LD1A limit non-driving Time N is 0-10S continuously adjustable.

 

Types of Products

    Note1：The function of setting for relay means that you can set the initialization and the output of the relay by yourself, which is acted by the dial switch on the panel; the specific setting guide can be found from the table 5. 

   Note2：OPTIONAL FUNCTION C: RTU Communication RS485, Model ASJ10L-LD1A/C

4. Model Selection of Residual Current Relay

 

5.Installation picture

 

 

6.  Summary

   ASJ series residual current relay has a very high performance-price ratio. As an advanced intelligent and digital residual current monitoring instrument, the residual current relay has been widely used in the incoming line or single-phase or three-phase of the household sub-box of civil buildings. Electric equipment in the power distribution line.

 

 Bibliography

1.Solutions For Enterprise Micro-grid System 2021.04

作者簡介：

朱鹍，女，就職于安科瑞電氣股份有限公司，主要研究方向為企業能源管控

：@手機：QQ：


安科瑞電子商務（上海）有限公司專注于變電所運維云平臺,安全用電管理云平臺,環保用電監管云平臺等, 歡迎致電 15000353138

• 詞條

  詞條說明

• 智能變電站變電運維與設備的維護

  摘要：由于我國當前經濟的高速發展與科技不斷進步，對供電要求進行了的提升，其中用戶又對供電性提出了高的需求，這就需要有關部門積做好變電所的建設，特別針對目前智能的變電運維與設備保護問題做出了積成效的優化，以改進社會電能的充分供給，對用戶實現了的供電，以推動社會的健康發展。本文主要提供了智能變電站變電運維和設施保護與優化方面的對策，期望對推動智能變電站良好的運營，并推動社會的可持續發展，做出積貢獻。關

• 淺談居住區電動汽車充電樁管理及設計研究

  朱鹍安科瑞電氣股份有限公司 上海嘉定201801?摘要：充電樁是電動汽車需具備的充電設施，加強對電動汽車充電樁的設計研究，可推動電動汽車的發展。就地下車庫電動汽車充電樁設計進行了研究，并結合工程實例，探討了充電樁的負荷計算、供配電系統設計、配電充電監控系統設計等，可為類似地下車庫充電樁設計提供有益的借鑒作用。?關鍵詞：地下車庫；充電樁；監控系統；鋰電池? 近年來，隨著

• Application of Acrel multi-circuit meter in Malaysia data center

  1.Abstract:? The quality of power supply in data center directly affects the operation of IT equipment, so IT is very important to monitor the incoming and outgoing lines of power supply in data

• 淺談如何實現*門監控系統的聯動控制邏輯

  朱鹍安科瑞電氣股份有限公司?上海嘉定 ?201801?摘要：本文針對*門監控系統遇火警后，如何控制*門開關的問題，提出具體的系統邏輯計算方法，并闡述了*門子系統與火災報警控制器的聯動流程。實現了*門監控器與火災報警系統的完整聯動。關鍵詞：*門；*門監控器；聯動；方法；*門監控系統????*門監控系統是建筑中*門