SIMATIC WinCC/SES V7.5

時間：2021-07-02

WinCC/SES supplements SIMATIC WinCC V7.5 with the functions of the Sequence Execution System

Product description

General:

WinCC/SES V7.5 (Sequence Execution System) is the option package of WinCC for sequential control of recipe-based and sequence-based processes.

WinCC/SES is especially suitable for production plants in which dosing, mixing and material transport are important process actions.

WinCC/SES supplements SIMATIC WinCC V7.5 with these functions

WinCC/SES offers easy changing of production parameters and production processes in Runtime without changing the PLC code.

Clear visualization of the production steps with the latest states.

Option for targeted intervention in the running process with manual jumps to a specific step or with automatic jumps as soon as a configured event occurs

Clearly structured comparison of actual values with setpoints for each individual step

Single-step mode in which the operator can switch to the next step independently.

WinCC/SES is especially suitable for production plants in which dosing, mixing and material transport are important process actions.

SIMATIC WinCC/SES V7.5 offers convenient configuration in the Configuration Studio

You can now keep multiple SES controls open at the same time.

SES V7.5 now gives you the option to define up to 200 steps in a sequence.

Control of up to 160 control elements per unit.

Up to 1000 parameters per sequence are now supported

SES V7.5 now supports up to 150 units.

Simultaneous saving of up to 5 sequences per unit in the PLC.

Exception handling (special sequences) is supported, which can be activated as soon as the Running state is changed to Holding, Resuming, Aborting, etc.

Compatibility

Note that SIMATIC WinCC/SES requires SIMATIC WinCC V7.5 as a basis.

WinCC/SES supplements SIMATIC WinCC V7.5 with the functions mentioned above.

In regard to configuration, WinCC/SES V7.5 has been released for the WinCC V7.5 operating system platforms

WinCC/SES WinCC/SES supports the following project types:

Configuration and Runtime are supported in the single-user system.

Configuration and Runtime are supported as follows in the multi-user system:

Project type	Configuration	Runtime
Server	Yes	Yes
Client without project	No	Yes
Client with project	No	Yes
Engineering System	Yes	Yes
Redundant server	No	No
Web Client	No	No

This is a limited release; for each order of the product the release of the Product Manager is requested by the planner.

Scope of delivery and ordering information

The licensing of the WinCC/SES option is based on the number of units that are controlled with WinCC/SES.

Two licenses are offered for WinCC/SES V7.5 which must be available on the server.

a) One basic license for up to two units
b) An extension license (countable) with which the basic license can be extended by five units each

Machine-readable product code	Article number
WinCC/SES V7.5 Sequence Execution System Basic Package (incl. 2 Units)	6AV6372-2DJ07-5AA0
WinCC/SES V7.5 Sequence Execution System Extension 5 Units	6AV6372-2BJ07-5BA0
WinCC/SES V7.5 Sequence Execution System Basic Package Upgrade V7.3 -> V7.5	6AV6372-2DJ17-5AA0
WinCC/SES V7.5 Sequence Execution System Basic Package Upgrade V7.4 -> V7.5	6AV6372-2DJ17-5AA1
WinCC/SES V7.5 Sequence Execution System Extension 5 Units Upgrade V7.3 -> V7.5	6AV6372-2BJ17-5BA0
WinCC/SES V7.5 Sequence Execution System Extension 5 Units Upgrade V7.4 -> V7.5	6AV6372-2BJ17-5BA1

13681875601

詞條
詞條說明
打印標簽
打印標簽如果有要求將標簽粘貼到所使用的模塊上，則可以打印您項目中模塊的標簽條。首先，將標簽導出為 Microsoft Word 文件格式 (.docx)。為每個模塊系列創建一個單獨的 .docx 文件（例如，對于所有選定的 S7-1500 模塊）。最后，再通過字處理程序打印這些標簽。要求打印標簽條時，必須滿足以下要求：所選模塊必須支持標簽打印。否則，數據只能輸出到 XML 文件中。必須安裝支持 M
RIPng 統計信息
RIPng 統計信息概述此頁面顯示了 RIPng 接口的統計信息。提示只有與設備存在在線連接時才顯示該頁面。顯示值說明該表格包括以下列：Interface顯示 RIPng 接口。Status顯示 RIPng 接口的狀態。-?up-?downMessages Received顯示路由器接收消息的頻率。Requests Received顯示路由器接收請求的頻率。Responses
什么是**化啟動？
什么是**化啟動？定義**啟動（也稱“快速啟動”）是一種 PROFINET 功能，用于在支持 RT 和 IRT 通信的 PROFINET IO 系統中加速 IO 設備的啟動。在以下情況下，該功能縮短了所組態 IO 設備恢復用戶數據周期性交換所需的時間：在電源電壓已經返回后在站已經返回后在 IO 設備已經啟動之后優點PROFINET 的“**啟動”功能可使得 PROFINET IO 可以應用于已經永
安全功能用戶管理（WBM 或 CLI）
用戶管理（WBM 或 CLI）用戶管理概述通過可組態的用戶設置來管理對設備的訪問。使用密碼設置用戶以供驗證。為用戶分配具有適當權限的角色。用戶的身份驗證可在本地由設備執行，也可由外部 RADIUS 服務器執行?？稍凇鞍踩?> AAA > 常規”(Security > AAA > General) 頁面中組態身份驗證的處理方式。本地登錄用戶本地登錄時設備的工作方式如下：用戶通