Configuration of digital inputs/outputs (X142)

時間：2021-07-28作者：上海騰希電氣技術有限公司瀏覽：78

Configuration of digital inputs/outputs (X142)



You configure the required digital input/outputs and operating modes over interface X142.

Overview of supported operating modes

You can configure the following operating modes for the individual channels of the X142 interface:

列表: Overview of operating modes

Operating mode of X142 I/Os (8 channels)	Functionality	Use with technology objects (TOs)	Use via I/O area (without TO)	Isochronous mode
DI	Digital input Input delay (1 μs/125 μs) Hardware interrupt (optional) Hardware interrupt at rising and/or falling edge	Hardware limit switch for positioning and synchronous axes	No OB restrictions	Optional
DQ	Digital output	Output cam Cam track	No OB restrictions	Optional
Timer DI	Acquisition of the switching time of a digital input ** with up to two edges per application cycle (e.g. for use as measurement sensing input)	Measuring input (OB 91 required)	OB 91/OB 6x required	Required
Timer DQ	Precisely timed output of a digital output ** with up to two edges per application cycle (e.g. for use as an output cam output)	Output cam (OB 91 required) Cam track (OB 91 required)	OB 91/OB 6x required	Required
Oversampling DI	Acquisition of 32 states of a digital input ** at equal intervals per application cycle	---	OB 91/OB 6x required	Required
Oversampling DQ	Output of 32 states of a digital output ** at equal intervals per application cycle	---	OB 91/OB 6x required	Required
Event/period duration measurement	Measurement of number of edges and period duration (e.g. for simple speed measurement with hole mask and light barrier)	---	OB 91/OB 6x required	Required
Pulse width modulation PWM	Output of a configurable pulse-pause ratio with a configurable frequency	---	No OB restrictions	Optional

Procedure

Select the Device configuration entry in the project tree under the CPU. The device view opens.

In the device view, click the DI/DQ 8x24VDC [X142] interface. You can now edit the configurable properties under Properties in the Inspector window.

You can find an overview of all channels and your selected settings under Channel parameters.


圖片: Channel parameters

To configure your selected channels, click on the arrow beside the channel number.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• 1200Web其它組態

  其它組態組態其它功能S7-1200 自動化系統具有數量眾多的功能，這些功能和集成 CPU 功能一樣實用，用戶還可以通過插入模塊來使用這些功能（例如，通信模塊）。 更多詳細的描述說明，可通過以下鏈接獲取。

• 移植集成項目

  移植集成項目簡介在集成項目中，將會在一個項目中同時使用 SIMATIC 控制器和 WinCC 組件。移植集成項目時，將會移植整個項目，包括 WinCC 和 STEP?7 的組件?？刂婆c可視化之間已組態的連接將保持不變。移植集成項目移植集成項目時，STEP 7 組件的移植要求與非集成 STEP 7 項目的移植要求是相同的。WinCC（TIA Portal）還必須支持 WinCC 組件中的對

• 選擇 CPU

  選擇 CPU簡介從硬件目錄中選擇一個 CPU，并且將其與機架一起置于網絡視圖中。 從硬件目錄中將所需的模塊拖到該設備上；這些模塊會自動排列在機架上。在硬件目錄中選擇組件在硬件目錄中，每個硬件組件顯示為一個文件夾。 打開此文件夾時，會顯示所選硬件組件的不同版本及其產品編號。以下是如何在網絡視圖中設置 CPU 與機架的示例。要求硬件目錄已打開。您必須處于網絡視圖中。步驟要從硬件目錄中選擇 CPU，請按

• 使用 CP 1613、CP 1623 和 CP 1628 進行子網尋址

  使用 CP 1613、CP 1623 和 CP 1628 進行子網尋址CP 1613、CP 1623 和 CP 1628 是具有微處理器的通信模塊。為安全處理通信連接，將在模塊上處理這些通信模塊。使用您的 PC 中的協議棧進行診斷（SNMP、DCP）。為了使兩個協議棧均能與相同的伙伴（IE 和 NDIS 訪問）進行通信，我們建議您將一個模塊的兩個協議棧置于同一子網中。