6ES7511-1FK02-0AB0

時間：2022-11-03

作者：上海騰希電氣技術有限公司

The CPU 1511F-1 PN has:

A powerful processor:
The CPU achieves a command execution time as low as 60 ns per binary command.

Extensive work memory:
230 KB for program, 1 MB for data

SIMATIC Memory Cards as load memory;
permit additional functions such as datalog and archives

Flexible expansion options: single-tier configuration with max. 32 modules (CPU + 31 modules)

Display with functions for

Display of overview information such as station name, higher level designation, location designation, etc.

Showing diagnostic information

Showing module information

Showing display settings

Setting IP addresses

Setting date and time

Switching the operating mode

Resetting the CPU to factory settings

Disabling/enabling the display

Enabling of protection levels

Display of safety mode, overall signature and date of the last download with signature change

PROFINET IO IRT interface for connecting distributed I/O via PROFINET

Supports PROFIsafe in centralized and distributed configuration

功能

Performance

Faster command processing, depending on the CPU type, lange extensions and new data types

Even shorter response times of the CPUs due to considerably faster backplane bus

Powerful network connection:
Each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.

Integrated technology

Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)

Support of speed-controlled and positioning axes as well as external encoders

Trace functions for all CPU tags, both for diagnostics in real time and for sporadic error detection

Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality

Security Integrated

Password-based know-how protection against unauthorized read-out and modification of program blocks

Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted in the CPU.

4-level authorization concept:
Communication to operator panels can also be restricted.

Manipulation protection:
The controller recognizes changed or unauthorized transmissions of the engineering data.

Design and handling

Display of overview information:
E.g. Station name, plant designation, location identifier, etc., diagnostic information, module information, display settings.

Possible operations on the display:
Set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.

Integrated system diagnostics

System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, operator panels and web server, even for messages from the drives, and updated even if the CPU is in STOP mode.

Integrated in the firmware of the CPU, no special configuration is required

SIMATIC Memory Card (required for operation of the CPU)

Used as plug-in load memory or for updating the firmware.

Also for storing additional documents or csv files (for recipes and archives)

Creation of data blocks for storage/reading of data via SFCs of the user program

Datalog (archives) and recipes

Storage of csv files for recipes and archives on the SIMATIC Memory Card;
easy access to plant-relevant operating data using Office tools and via web server

Easy access to configuration data of the machine by means of a web browser or SD card reader (two-way data exchange from and to the PLC)

Programming of the standard program section

Programming as of STEP 7 V12 SP1

Programming of the fail-safe program section

Programming of the safety-related program section with the "STEP 7 Safety Advanced" option package. STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.

13681875601

詞條
詞條說明
安全刪除證書
刪除證書簡介可通過證書管理器刪除可用的證書。要求設備必須通過證書管理器實現安全功能。這適用于固件版本為 V2.0 或較高版本的 S7-1500 CPU。操作步驟若要刪除證書，請按照以下步驟進行操作：在巡視窗口中，轉至設備屬性的“保護和安全 > 證書管理器”(Protection & Security > Certificate manager)。右鍵單擊待刪除證書所在的行，打開
PC Access SMART
1.1介紹S7-200 PC Access SMART是西門子公司針對S7-200 SMART PLC與上位機通信推出的OPC（OLE for Process Control）服務器軟件。其作用是跟其他標準的OPC客戶端（Client）通信并提供數據信息。S7-200 PC Access SMART與S7-200 PLC的OPC 服務器軟件 PC Access類似，也具有OPC客戶端測試功能，使用
V90驅動器通信方式
SINAMICS V90 伺服驅動器支持以下幾種通信方式：(1)?USS通信可以通過 RS485 電纜與 PLC 連接，使用USS 通信協議進行通信。通信建立之后，可以通過 USS 通信協議改變位置設定值和速度設定值。通過 USS 通信協議，伺服驅動也可以與 PLC 進行實際速度，扭矩以及報警的傳輸。(2)?Modbus RTU通信V90自固件版本V1.05 開始，伺服驅動通過
編程軟件TIA Portal
1. TIA Portal STEP7 訂貨號組態S7-300/400需要使用TIA Portal STEP7 Professional，當前較新版本為TIA Portal STEP7 Professional V17。請注意：TIA Portal STEP7不支持部分老舊型號的S7-300系列CPU及模塊的組態；不支持軟冗余功能。TIA Portal STEP7 Professional V17