ASTM A系列標準美國材料與試驗標準（二）

時間：2018-09-08作者：溫州亞仕密不銹鋼有限公司瀏覽：290

A289/A289M-97(2003)	發電機非磁性定位環用合金鋼鍛件的技術規范	Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A290-02	減速器環用碳素鋼和合金鋼鍛件	Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291-03	減速器小齒輪、齒輪和心軸用碳素鋼和合金鋼鍛件	Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A295-98	高碳耐磨軸承鋼技術規范	Standard Specification for High-Carbon Anti-Friction Bearing Steel
A297/A297M-97(2003)	一般用耐熱鉻鐵與鎳鉻鐵合金鋼鑄件規格	Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A299/A299M-04	壓力容器用錳硅碳鋼板	Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302/A302M-03	壓力容器用錳鉬和錳鉬鎳合金鋼板	Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A304-04	有末端淬火淬透性要求的合金鋼棒材的技術規范	Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A307-04	抗拉強度為60000psi的碳素鋼螺栓和螺柱的技術規范	Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A308/A308M-03	經熱浸處理鍍有鉛錫合金的薄板材的技術規范	Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A309-01	用三點試驗法測定長鍍鋅薄鋼板鍍層的重量成分的試驗方法	Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A311/A311M-04	**械性能要求的消除應力的冷拉碳素鋼棒	Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A312/A312M-04a	無縫和焊接奧氏體不銹鋼管	Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A313/A313M-03	不銹鋼彈簧絲技術規范	Standard Specification for Stainless Steel Spring Wire
A314-97(2002)	鍛造用不銹及耐熱鋼坯及鋼棒規格	Standard Specification for Stainless Steel Billets and Bars for Forging
A319-71(2001)	高溫無壓部件用灰鐵鑄件	Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
A320/A320M-04	低溫用合金鋼螺栓材料規格	Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
A321-90(2001)	經淬火和回火的碳素鋼棒	Standard Specification for Steel Bars, Carbon, Quenched and Tempered
A322-91(2001)e1	合金鋼棒材.級別	Standard Specification for Steel Bars, Alloy, Standard Grades
A323-93(2000)	硼鐵規格	Standard Specification for Ferroboron
A324-73(2000)	鈦鐵合金	Standard Specification for Ferrotitanium
A325-04a	經熱處理較小抗拉強度為120/105ksi的熱處理鋼結構螺栓	Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A325M-04a	經熱處理較小抗拉強度為830Mpa的熱處理鋼結構螺栓	Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]
A327-91(1997)	鑄鐵沖擊試驗方法	Standard Test Methods for Impact Testing of Cast Irons
A327M-91(1997)	鑄鐵沖擊試驗方法(米制)	Standard Test Methods for Impact Testing of Cast Irons (Metric)
A328/A328M-03	薄鋼板樁	Standard Specification for Steel Sheet Piling
A333/A333M-04a	低溫用無縫與焊接鋼管規格	Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A334/A334M-04a	低溫設備用無縫與焊接碳素和合金鋼管	Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A335/A335M-03	高溫用無縫鐵素體合金鋼管	Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A336/A336M-03a	壓力與高溫部件用合金鋼鍛件規格	Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A338-84(2004)	鐵路,船舶和其他重型裝備在溫度達到650華氏度(345攝氏度)時使用的可鍛鑄鐵法蘭,管件和閥門零件	Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A340-03a	有關磁性試驗用符號和定義的術語	Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M-00	用直流磁導計和沖擊試驗法測定材料的直流磁性能的試驗方法	Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
A342/A342M-99	磁鐵材料導磁率的試驗方法	Standard Test Methods for Permeability of Feebly Magnetic Materials
A343/A343M-03	在電力頻率下用瓦特計-安培計-伏特計法(100-1000赫茲)和25 厘米艾普斯亭(EPSTEIN) 機架測定材料的交流電磁性能的試驗方法	Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A345-98	磁設備用平軋電爐鋼	Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A348/A348M-00	用瓦特計--安培計--伏特計法(100-10000赫茲)和25厘米艾普斯亭框測定材料的交流磁性能的試驗方法	Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A350/A350M-04	要求進行缺口韌性試驗的管道部件用碳素鋼與低合金鋼鍛件技術規范	Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A351/A351M-03	容壓零件用奧氏體及奧氏體鐵素體鑄鐵的技術規范	Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
A352/A352M-03	低溫受壓零件用鐵素體和馬氏體鋼鑄件規格	Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A353/A353M-93(1999)	壓力容器用經二次正火及回火處理的含9％鎳的合金鋼板	Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
A354-04	淬火與回火合金鋼螺栓,雙頭螺栓及其他外螺紋緊固件規格	Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A355-89(2000)	滲氮用合金鋼棒	Standard Specification for Steel Bars, Alloys, for Nitriding
A356/A356M-98(2003)	蒸汽輪機用厚壁碳素鋼、低合金鋼和不銹鋼鑄件	Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A358/A358M-04	高溫用電熔焊奧氏體鉻鎳合金鋼管	Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A363-03	地面架空線用鍍鋅鋼絲繩	Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A367-60(1999)	鑄鐵的激冷試驗方法	Standard Test Methods of Chill Testing of Cast Iron
A368-95a(2000)	不銹鋼和耐熱鋼絲繩的標準	Standard Specification for Stainless Steel Wire Strand
A369/A369M-02	高溫用鍛制和鏜孔碳素鋼管和鐵素體合金鋼管	Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370-03a	鋼制品機械測試的標準試驗方法和定義	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A372/A372M-03	薄壁壓力容器用碳素鋼及合金鋼鍛件	Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A376/A376M-02a	高溫中心站用無縫奧氏鋼管	Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A377-03	球墨鑄鐵壓力管規范索引	Standard Index of Specifications for Ductile-Iron Pressure Pipe
A380-99e1	不銹鋼零件、設備和系統的清洗和除垢	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A381-96(2001)	高壓輸送用金屬弧焊鋼管	Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A384/A384M-02	防止鋼組件熱浸鍍鋅時翹曲和扭曲用安全保護	Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A385-03	提供高質量鍍鋅覆層(熱浸)	Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A387/A387M-03	壓力容器用鉻鉬合金鋼板	Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A388/A388M-03	重型鋼鍛件超聲波檢測	Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
A389/A389M-03	適合高溫受壓部件用經特殊熱處理的合金鋼鑄件規格	Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390-95(2001)	飼養家禽用鍍鋅鋼絲欄柵網(六角形和直線形)	Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A391/A391M-01	80號合金鋼鏈條	Standard Specification for Grade 80 Alloy Steel Chain
A392-03	鍍鋅鋼絲鏈環欄柵網	Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394-04	傳動塔架用鍍鋅和裸露鋼螺栓	Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A395/A395M-99e1	高溫用鐵素體球墨鑄鐵受壓鑄件	Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A400-69(2000)	鋼棒的成分及機械性能選擇指南	Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A401/A401M-03	鉻硅合金鋼絲	Standard Specification for Steel Wire, Chromium-Silicon Alloy
A403/A403M-04	鍛制奧氏體不銹鋼管配件	Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A407-93(2004)	盤簧用冷拉鋼絲	Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A409/A409M-01	腐蝕場所或高溫下使用的焊接大口徑奧氏體鋼管	Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A411-03	鍍鋅低碳鋼鎧裝線	Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A413/A413M-01	碳素鋼鏈	Standard Specification for Carbon Steel Chain
A414/A414M-04	壓力容器用碳素薄鋼板	Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
A416/A416M-02	預應力混凝土用無涂層七股鋼鉸線	Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A417-93(2004)	之字形、方形、正弦形家具用彈簧元件用冷拔鋼絲	Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
A418-99(2003)	渦輪機及發電機鋼轉子鍛件的超聲波檢查方法	Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A420/A420M-04	低溫下用鍛制碳素鋼和合金鋼管配件	Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M-02	預應力混凝土用無涂層消除應力鋼絲的技術規范	Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A423/A423M-95(2000)	無縫和電焊低合金鋼管	Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A424-00	搪瓷用鋼薄板	Standard Specification for Steel, Sheet, for Porcelain Enameling
A426/A426M-02	高溫用離心鑄造的鐵素體合金鋼管	Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A427-02	冷軋和熱軋用鍛制合金鋼輥	Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A428/A428M-01	鋼鐵制品上鋁覆層重量的測試方法	Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A434-04	熱軋與冷精軋經回火及淬火的合金鋼棒	Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A435/A435M-90(2001)	鋼板的直射束縱向超聲波檢驗	Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A436-84(2001)	奧氏體灰口鐵鑄件	Standard Specification for Austenitic Gray Iron Castings
A437/A437M-01a	高溫用經特殊處理的渦輪型合金鋼螺栓材料	Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
A439-83(1999)	奧氏體可鍛鑄鐵鑄件	Standard Specification for Austenitic Ductile Iron Castings
A447/A447M-93(2003)	高溫用鎳鉻鐵合金鋼鑄件(25-12級)	Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A449-04a	經淬火和回火的鋼螺栓和螺柱	Standard Specification for Quenched and Tempered Steel Bolts and Studs


溫州亞仕密不銹鋼有限公司專注于不銹鋼管,不銹鋼無縫管,不銹鋼焊管等

• 詞條

  詞條說明

• ASTM A系列標準大全美國材料與試驗協會（四）

  A576-90b(2000) 特級熱軋?zhí)妓劁摪?Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality A577/A577M-90(2001) 鋼板的超聲角波束檢驗 Standard Specification for Ultrasonic Angle-Beam Examination of Stee

• ASTM A系列標準美國材料與試驗標準（二）

  A289/A289M-97(2003) 發電機非磁性定位環用合金鋼鍛件的技術規范 Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators A290-02 減速器環用碳素鋼和合金鋼鍛件 Standard Specification for Carbon and Al

• 不銹鋼管液壓公式

  在說不銹鋼管液壓公式之前先看一組圖片數據 不銹鋼管液壓試驗計算公式 P=2SR/D*9.8 P=兆帕 S=壁厚 R=允許應力，按表中規定塑性延伸強度較小值的60%，單位為兆帕（MPA） 例如:159*5 ?304材質的承受壓力 P=2*5*123/159=7.736兆帕,7.36*9.8=75.81KG 鋼管材質理論重量值計算方式 如：0Cr18Ni9 密度為：0.02491 &nbs

• GB與ASME管材使用溫度化學成份力學性能對照

  碳鋼，不銹鋼管材不同標準的化學成份，使用溫度。值得收藏，分享，學習！ 溫州亞仕密（ASM）不銹鋼有限公司座落于全國不銹鋼管的生產基地,浙江省溫州市龍灣區永強高新園區度山工業區,距溫州機場3公里,龍灣萬噸級碼頭6公里,鐵路客運站20公里,地理位置優越,海、陸、空交通運輸十分便利.我們主要制造加工經營銷售以下產品： 主要材質：200、201、304（06Cr19Ni10）、TP304L（022Cr1