Configuring Timer DQ operating mode

時間：2021-07-28作者：上海騰希電氣技術有限公司瀏覽：92

Configuring Timer DQ operating mode



Timer DQ

Timer DQ operating mode allows you to output up to two edges per application cycle (for example OB 91, OB 6x) at a specific time, for example, for use as a cam output.

Select the Timer DQ operating mode for the required channel.


圖片: Mode of operation: Timer DQ

Inversion

You can invert the 24 V ** to adjust it to your process. By default, the ** is not inverted.

High-speed output

If you select the high-speed output option, the digital output is switched alternately to 24 V DC and ground.

Advantages of the high-speed output:

Extremely steep edges (output delay in the 1 μs range)

Extremely high switching frequencies

Maximum switching precision, for example, for use as a cam output

Assigning the output cam technology object

The output cam technology object must always be assigned to another technology object whose position is evaluated.

You can assign the output cam technology object to the following technology objects:

Synchronous axis

Positioning axis

External encoder

You can assign exactly one axis or one external encoder to the output cam.

You can assign multiple output cams to one axis or one external encoder.

Configuring the output cam technology object

Select the configuration of the output cam in the Technology objects folder in the project tree.

Configure the basic properties of the technology object in the Basic parameters configuration window.


圖片: Basic parameters

Name

Define the name of the output cam in this field. The technology object is listed under this name in the project tree. The tags of the output cam can be used in the user program under this name.

Assigned axis or external encoder

STEP 7 displays the axis or external encoder assigned to the output cam. You can use the link to directly access the basic parameters of the higher-level technology object.

Output cam type

Select an output cam type on the basis of the required switching behavior:

Position-based cam (position-dependent switch-on/switch-off)

Time-based cam (position-dependent switch-on and position-independent or time-dependent switch-off)

Output cam reference

In this selection, configure whether the switching points of the output cams are to reference the actual position or the position setpoint.

Unit of measurement

The unit of measurement shown for the position of the output cam corresponds to the unit of measurement of the higher-level technology object.

When a time-based cam is selected as the output cam type, the unit of measurement for the switch-on duration and other times is also indicated. The unit of measurement for output cams is always ms.

Hardware interface

Select the type of cam output in the Hardware interface configuration window.


圖片: Hardware interface

Select whether you want to output the switching **s generated at the digital output.

Activate output

Select one of the following two output options for outputting the cam track:

- Output via Timer DQ

For output by Timer DQ, select a cam output in the Output field. The selection box displays all channels that have been configured correctly.

提示 Extending the configuration limits A maximum of eight timer DQ can be configured at the X142 interface. If the Timer DQ at X142 are not sufficient for your needs, you can increase the configuration limits with time-based IO modules: - ET 200SP distributed I/O system: TM Timer DIDQ 10x24V - ET 200MP distributed I/O system: TM Timer DIDQ 16x24V You can find more information on these systems in .




提示 Unsupported instructions for the X142 interface The function blocks for the use of time-based IO (TIO instructions) are not supported by the X142 interface. Recommendation: For the timer DQ, use the output cam or cam track technology object.




- Output by digital output module

For output by a digital output module, select a digital output in the Output field. Only the digital outputs with previously defined PLC tags are displayed for selection.

提示 Output via the X122, X132 or X142 interface Also use the "Output by digital output module" setting in the following cases: - The output occurs at the X142 interface by a DQ instead of a Timer DQ. - The output occurs by a digital output of the X122 or X132 interface (configured ** 39x required) In both cases you must define a PLC tag for the respective I/O address.




Output deactivated
When output is deactivated, the cam track is evaluated only in the software.

Extended parameters > Activation time


圖片: Activation time

The specified output cam type is indicated at the top of the Activation time configuration window.

For a time shift of the switch-on and switch-off times of the output cams, enter an activation time and a deactivation time.

Extended parameters Parameter > Hysteresis


圖片: Hysteresis

To prevent unwanted changes in the switching state of the output cams of a cam track, enter a hysteresis value.

When using output cams that reference the actual position, it is advisable to enter a hysteresis value (> 0.0).

Cam track technology object

In addition to the output cam technology object already described, the cam track technology object is also available.


上海騰希電氣技術有限公司專注于西門子PLC,V90伺服,V20變頻器等, 歡迎致電 13681875601

• 詞條

  詞條說明

• 使用 STEP 7 管理證書

  使用 STEP 7 管理證書STEP 7 V14（及較高版本）連同 S7-1500-CPU（固件版本為 2.0 及較高版本）支持 Internet PKI (RFC 5280)的范圍為，確保 S7-1500 CPU 能夠與同樣支持 Internet PKI 的設備進行通信。例如，會因此而使用 X.509 證書來驗證前文介紹的證書。STEP?7 V14 及較高版本采用的 PKI 與 Int

• 使用預定義 MAC 規則組態*墻 - CP 343-1 Adv./443-1 Adv.

  使用預定義 MAC 規則組態*墻 - CP 343-1 Adv./443-1 Adv.如何訪問該功能選擇待編輯的模塊。選擇“*墻 > 預定義的 MAC 規則”(Firewall > Predefined MAC rules) 條目。列表: 可用的服務和方向服務從站到外部從外部到站含義允許 MAC 通信xx允許從站到外部的 MAC 通信，反之亦然。允許 ISO 協議xx允許從站到外部

• 開放式用戶通信的基本知識

  開放式用戶通信的基本知識簡介開放式用戶通信 (OUC) 是通過 S7-1200/1500 和 S7-300/400 CPU 集成的 PN/IE 接口進行程序控制通信過程的名稱。 這種通信過程可以使用各種不同的連接類型。開放式用戶通信的主要特點是在所傳送的數據結構方面具有高度的靈活性。 這就允許 CPU 與任何通信設備進行開放式數據交換，前提是這些設備支持該集成接口可用的連接類型。 由于此通信僅由用

• 設置保護選項

  設置保護選項訪問等級以下內容將介紹如何使用 S7-1500 CPU 的各種訪問等級。S7-1500 CPU 提供各種訪問等級，以限制對特定功能的訪問。將在 CPU 的對象屬性中*各種訪問等級以及相關的密碼?？稍诒碇?訪問等級的參數。各個訪問等級右側列中的綠色復選標記*在不知道此訪問等級的密碼的情況下，可以執行的操作。如果要使用未在“訪問”(Access) 列中選擇的域功能，那么需要輸入密碼：